Suitable for lifting and moving glass, floor, window, tile, granite, doors and any clean, smooth, flat, non-porous dry surface.

Glass knives are divided into manual glass knives and T - shaped glass knives
Manual glass knife usage instructions: Use a ruler to fix the size, hold the ruler down, run the glass knife down the ruler, pay attention to the force, feel the sound of the glass skin,
If the feeling is silent. I'm sure it wasn't strong enough. Redraw. After the line, has not been successful, the glass knife cushion under the glass, the glass on the table, the knife is also cushion under the glass on the table, against the scratch marks, take good gloves, pay attention to safety, two palms respectively hold traces of two sides, the average position of the edge of the glass, both palms at the same time, to quickly, to fast, do not slowly force, heard, bang, bang, Immediately pull back, prevent two hands to push the separate glass hard on the table and crack, finish, glass is neat, beautiful. Finally, use an emery cloth to edge the glass, just not too sharp.

Precautions for use:
1, the size should be accurate (standard ruler), to reserve the knife position; Before cutting, appropriate amount of kerosene should be applied to assist cutting;
2, when cutting to a knife in the end, the middle can not stop, the glass to the correct Angle (along with the shape of the glass knife can), can not be repeated cutting, will damage the tool;
3. When breaking pieces, the cutting line should be about 6-8 cm away from the edge of the table to prevent falling. When cutting, pay attention not to cut your clothes, or the skin is cut by glass.
Usage of T-shaped glass knife: First adjust the arrow on the assembly to the scale to be drawn, and then put the pulley against the glass edge, with one hand holding the pulley, and the other hand holding the scale to draw from left to right at a uniform speed. In the process of rowing, pay attention to the knife head of the T-shaped glass knife and the pulley should be kept parallel.