How To Make Glass Glue Look Good?

How to make glass glue look good?

Glass glue is used in many places in the home decoration process. Many users are more willing to make glass glue by themselves, but if your memory is not proficient, you will find that there are bubbles or unevenness in the glass glue. You need to improve your own skills, so how to make glass glue look good? Let’s take a look at the skills of using glass glue.

Remove moisture, grease, dust and other pollutants on the surface of the joint. When appropriate, clean the surface with a solvent (such as xylene, methyl ethyl ketone), and then wipe off all residues with a clean rag to make it fully clean and dry. Cover surfaces near the connectors with plastic tape.
To ensure perfect and neat sealing working lines. Cut the nozzle of the rubber hose, install the nozzle tube, and then cut it at a 45° angle according to the size of the caulking. Install the glue gun, keep the angle of 45° to press out the glue along the gap to ensure that the glue is in close contact with the surface of the substrate. When the seam width is greater than 15 mm, it is necessary to apply glue repeatedly. After gluing, trim the surface with a knife to remove excess glue, and then tear off the tape. If there is any stain, use a damp cloth to remove it. The surface of the sealant is vulcanized after 10 minutes at room temperature, and it takes 24 hours or more to fully vulcanize, depending on the thickness of the glue and the temperature and humidity of the environment.

Tips for using glass glue:
Cleaning work: Before the glass glue is glued, it is necessary to remove the moisture, dust and other dirt on the surface of the joint. The surface of the two objects to be bonded should be cleaned and kept dry, and then covered with plastic tape The surface of the interface ensures the perfection and orderliness of the sealing working lines.
Specific bonding: Cut the mouth of the nozzle, install the nozzle tube, then cut it at a 45-degree angle according to the size of the caulking, install the glue gun, and keep the 45-degree angle to press out the glue along the gap to ensure the glue and The surface of the substrate is in close contact, when the seam width is greater than 15mm. Glue needs to be applied repeatedly. After gluing, use a knife to trim the surface, remove excess glue, and then tear off the tape. If there is any stain, it can be removed with a damp cloth.

YAOTAI is a professional glass manufacturer and glass solution provider include range of tempered glass,laminated glass, float glass,mirror,Door and window glass, furniture glass,reflective glass, embossed glass, coated glass,textured glass and etched glass. With more 20 years development,there are two produce lines of pattern glass,two lines of float glass and one line of restoration glass. our products 80% ship to overseas,All our glass products are strict quality control and carefully packed in strong wooden case,ensure you receive the finest quality glass safety in time.